Asus DA-3000 Owners Manual - Page 25

Setting the master clock You can set the master clock used by this unit. CAUTION When multiple digital audio devices are connected in the same system, make certain that they all use the same master clock. 1. Press the MENU button to open the GENERAL menu, and turn the MULTI JOG dial to select CLOCK MSTR. 2. Press the MULTI JOG dial to open the CLOCK screen. 4 - Recording Setting the reference level You can set the reference level for analog input and output to a dB value less than the maximum level (0dB). 1. Press the MENU button to open the GENERAL menu screen, and turn the MULTI JOG dial to select (highlight) REF. LEVEL. 2. Press the MULTI JOG dial to open the REFERENCE LEVEL screen. 3. Turn the MULTI JOG dial to select the master clock. Options: Internal (default): Use the unit's built-in master clock. WORD: Use the clock signal input through the WORD SYNC IN connector as the master clock. DIN (DIGITAL IN): Use the clock signal of the currently selected digital audio input source as the master clock. 4. Press the MULTI JOG dial to confirm the selection and return to the menu screen. NOTE • If a "CLOCK LOST..." pop-up error message appears, press the EXIT/CANCEL [PEAK CLEAR] button to return to the Menu Screen, and change the master clock setting. • If the unit cannot lock to the set master clock, it will automatically switch to the internal clock and a star (*) will appear at the end of the selected setting. 3. Turn the MULTI JOG dial to set the reference level. Options Details −9dB −14dB −16dB (default) −18dB Standard level: +6 dBu Maximum level: +15 dBu Standard level: +4 dBu Maximum level: +18 dBu Standard level: +4 dBu Maximum level: +20 dBu Standard level: +4 dBu Maximum level: +22 dBu −20dB Standard level: +4 dBu Maximum level: +24dBu 4. Press the MULTI JOG dial to confirm the selection and return to the menu screen. • When using WORD CLOCK and recording in DSD format, please use a 44.1kHz signal. TASCAM DA-3000 25