Asus M20 Owners Manual - Page 98
Change the Fuse in the Vehicle Power Cable, Mount on Your Dashboard, A mounting disk is included
View all Asus M20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Appendix Change the Fuse in the Vehicle Power Cable Caution: When replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper position. If your device does not charge in your vehicle, you may need to replace the fuse located at the tip of the vehicle adapter. 1. Unscrew the end piece, and remove it. 2. Remove the fuse (glass and silver cylinder), and replace with a 1A fast blow fuse of the same size. 3. Ensure that the silver tip is located in the end piece. Screw on the end piece. End piece Silver tip Fuse Mount on Your Dashboard A mounting disk is included in some nüvifone packages. Use the mounting disk to mount your device to the dashboard and comply with certain state and local regulations. Caution: The permanent mounting adhesive is extremely difficult to remove after it is installed. 1. Clean and dry the dashboard where you are placing the disk. 2. Remove the backing from the adhesive on the bottom of the disk. 3. Place the disk on the dashboard. 4. Remove the clear plastic cover from the top of the disk. 5. Place the suction cup mount on top of the disk. Flip the lever down (toward the disk). 90 nüvifone M20 Owner's Manual