Asus PU-DLS PU-DLS User Manual - Page 130

Novell® Netware® Server (continued) B. NetWare 4.2 and 5.x/6.0 Installations 1. Prepare the Intel(R) PRO/1000 Server Adapter driver from the previous section. 2. Install NetWare 4.2 according to the NetWare instructions. 3. When the NetWare installation procedure prompts you for a Network Driver, insert the Intel PRO/1000 driver disk into drive A: Then use the INS key to select an unlisted driver. A dialog box appears. The "CE100B.LAN - Intel 825XX PCI Adapter (CHSM spec 1.11) " driver appear as a selection. If the "Loader could not find public symbol: " error message prompted when system is loading Intel Pro/100+ PCI network driver, it is because the related network driver modules are too old. Download the latest Netware Support Pack from Novell web site at: http://support.novell.com/products/nw411/patches.htm 4. Installation of the Intel 82544GC/82540EM Network Adapter for NetWare 4.2 or 5.x/6.0 is complete. Add or check the load and bind statements you need to the server's AUTOEXEC.NCF file so the PRO/1000 adapter driver loads automatically load and bind the server driver as follows: LOAD CE100B SLOT=x FRAME=ETHERNET_802.2 BIND IPX TO CE100B NET=xxxxxxxx where: SLOT=x Specifies the NBI (NetWare Bus Interface) slot number. Substitute x with the valid value for the adapter. You will be prompted with the slot number(s) of installed PRO/100+ adapters. The NBI numbers are different from the slot number indicated in the SETUP.EXE utility. NET=xxxxxxxx is the unique network address for that LAN segment. The default frame type is 802.2. If your workstation needs to use the 802.3 frame type, see the section later in this document about using multiple frame types on one adapter. 5.5.3 ATI® Rage XL Display Driver Installation You can select the "Super VGA" for the X Server on NetWare 5.x server system. The other NetWare system didn't support X Server and you didn't need the VGA driver support. 5-38 Chapter 5: Driver installation