Asus PU-DLS PU-DLS User Manual - Page 48

Hardware information, CPU, Chassis, and Power Fan Connectors, pin CPU_FAN1, CPU_FAN2,

Get Asus PU-DLS - Motherboard - Extended ATX PDF manuals and user guides
UPC - 610839116966
View all Asus PU-DLS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

6. CPU, Chassis, and Power Fan Connectors (3-pin CPU_FAN1, CPU_FAN2, CHASSIS_FAN1, CHASSIS_FAN2) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! ® PU-DLS CPU_FAN1 CHASSIS_FAN2 GND +12V Rotation Rotation +12V GND PU-DLS 12-V Fan Connectors Rotation +12V GND CHASSIS_FAN1 CPU_FAN2 GND +12V Rotation 7. Wake-On-Ring Connector (2-pin WOR1) This connector connects to internal modem cards with a Wake-OnRing output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. For external modems, Wake-On-Ring is detected through the COM port. ® PU-DLS WOR1 Ring# Ground PU-DLS Wake-On-Ring Connector 2-22 Chapter 2: Hardware information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
2-22
Chapter 2: Hardware information
6.
CPU, Chassis, and Power Fan Connectors
(3-pin CPU_FAN1, CPU_FAN2, CHASSIS_FAN1, CHASSIS_FAN2)
The fan connectors support cooling fans of 350mA~740mA (8.88W
max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan
cables to the fan connectors on the motherboard, making sure that the
black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Lack of
sufficient air flow within the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on
the fan connectors!
7.
Wake-On-Ring Connector (2-pin WOR1)
This connector connects to internal modem cards with a Wake-On-
Ring output. The connector powers up the system when a ringup
packet or signal is received through the internal modem card.
For external modems, Wake-On-Ring
is detected through the COM
port.
PU-DLS
PU-DLS 12-V Fan Connectors
CHASSIS_FAN1
CPU_FAN2
GND
Rotation
+12V
CPU_FAN1
GND
Rotation
+12V
CHASSIS_FAN2
GND
Rotation
+12V
GND
Rotation
+12V
PU-DLS
PU-DLS Wake-On-Ring Connector
WOR1
Ring#
Ground