Asus PU-DLS PU-DLS User Manual - Page 22

Core specifications - 533

Get Asus PU-DLS - Motherboard - Extended ATX PDF manuals and user guides
UPC - 610839116966
View all Asus PU-DLS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

1.4.2 Core specifications 1 SSI/ATX power connector. This 24/20-pin connector is for an SSI-type/ATX power supply. 2 DDR DIMM sockets. These six 184-pin DIMM sockets support up to 12GB system memory using registered ECC PC2100/1600 DDR DIMMs. 3 Intel® E7501 (Plumas 533) MCH. The E7501 Memory Controller Hub (MCH) processor interface supports the System Bus Protocol at peak bandwidth of 3.2 GB/s (400 MHz) or 4.26 GB/s (533 MHz), and is optimized for dual Intel Xeon processors with 512-KB L2 cache. The MCH supports a 144-bit wide channel of Double Data Rate (DDR) DRAM operating in lock-step, and provides Hub Interface 1.5 connection for ICH3-S and Hub Interface 2.0 connection for P64H2 devices. 4 Intel® P64H2 PCI-X hub. The P64H2 is PCI/PCI-X 64-bit Hub 2 that provides high-performance I/O capability including 16-bit Hub Interface 2.0 connection to MCH, and two independent 64-bit PCI/ PCI-X interfaces. 5 604-pin CPU sockets. Two 604-pin surface mount, Zero Insertion Force (ZIF) sockets are onboard for the Intel® Xeon™ processor with 512KB L2 cache and a 400/533 MHz system bus that allows up to 3.2GB/s or 4.26GB/s data transfer rate. These sockets also support Intel Xeon CPUs with Hyper-Threading Technology feature. 6 8/4-pin 12V SSI power connector. This 8/4-pin connector is for an SSI-type/ATX power supply. 7 SCSI connector. This dual-channel SCSI connector supports up to 30 devices and data transfers of 320Mbps. 8 Adaptec AIC™-7902W SCSI controller. The 7902W SCSI controller is a PC 2000-2001-compliant PCI-X dual-channel Ultra320 SCSI ASIC. Each channel supports a data transfer rate up to 320 MB/s on a Wide (16-bit) SCSI bus with Low Voltage Differential (LVD) devices. The combined available SCSI throughput is 640 MB/s. In PCI and PCI-X modes, the controller operatess as a multifunction 32-bit or 64-bit bus master. 9 Firmware hub. This 4Mb firmware hub (FWH) contains the programmable BIOS program. 1-8 Chapter 1: Product introduction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
1-8
Chapter 1: Product introduction
SSI/ATX power connector.
This 24/20-pin connector is for an
SSI-type/ATX power supply.
DDR DIMM sockets.
These six 184-pin DIMM sockets support up
to 12GB system memory using registered ECC PC2100/1600 DDR
DIMMs.
Intel
®
E7501 (Plumas 533) MCH.
The E7501 Memory Controller
Hub
(MCH) processor interface supports the System Bus Protocol
at peak bandwidth of 3.2 GB/s (400 MHz) or 4.26 GB/s (533 MHz),
and is optimized for dual Intel Xeon processors with 512-KB L2
cache. The MCH supports a 144-bit wide channel of Double Data
Rate (DDR) DRAM operating in lock-step, and provides Hub
Interface 1.5 connection for ICH3-S and Hub Interface 2.0
connection for P64H2 devices.
Intel
®
P64H2 PCI-X hub.
The P64H2 is PCI/PCI-X 64-bit Hub 2
that provides high-performance I/O capability including 16-bit Hub
Interface 2.0 connection to MCH, and two independent 64-bit PCI/
PCI-X interfaces.
604-pin CPU sockets.
Two 604-pin surface mount, Zero Insertion
Force (ZIF) sockets are onboard for the Intel
®
Xeon™ processor
with 512KB L2 cache and a 400/533 MHz system bus that allows
up to 3.2GB/s or 4.26GB/s data transfer rate. These sockets also
support Intel Xeon CPUs with Hyper-Threading Technology feature.
8/4-pin 12V SSI power connector.
This 8/4-pin connector is for an
SSI-type/ATX power supply.
SCSI connector.
This dual-channel SCSI connector supports up
to 30 devices and data transfers of 320Mbps.
Adaptec AIC™-7902W SCSI controller.
The 7902W SCSI
controller is a PC 2000-2001-compliant PCI-X dual-channel
Ultra320 SCSI ASIC. Each channel supports a data transfer rate up
to 320 MB/s on a Wide (16-bit) SCSI bus with Low Voltage
Differential (LVD) devices. The combined available SCSI
throughput is 640 MB/s. In PCI and PCI-X modes, the controller
operatess as a multifunction 32-bit or 64-bit bus master.
Firmware hub.
This 4Mb firmware hub (FWH) contains the
programmable BIOS program.
1.4.2
Core specifications
9
8
7
6
5
4
3
2
1