Brother International ™ QL-1050 Software Users Manual - English - Page 38

Introduction Printing the Label This section explains how to print a created label. 1 Click . The labels are printed. 2 Cut off the printed label using the Cut button or the Cut lever (Brother QL-500) of the printer. In the [Print] dialog box, if [Auto Cut] is checked in [Options], the printed labels will be automatically cut (Not available for QL500). Print Options and label cutting Clicking [File]-[Print] will open the [Print] dialog box. This dialog box allows you to set the print options and the number of copies. You can set the number of labels between cuts with the Option tab in the Print dialog box displayed when you click the Properties button (QL-1050/1050N only). Creating Labels (For Windows) Creating Labels (For Macintosh) Settings Details Auto Cut (QL-550/650TD/ 1050/1050N) When this check box is checked, labels will be automatically cut. When this check box is not checked, labels won't be automatically cut after printing. Press the Cut button in the printer to cut them, as needed. Options Cut at end (QL-650TD/ 1050/1050N) When multiple labels are printed, only cuts after the final label is printed. When this check box is checked, labels will be flipped horizontally and Mirror Printing printed. Output Directly Check this check box for normal use. Printer Driver Copies Number Used to specify the number of copies to be printed. All Records Prints all contacts in shown in the Record View. Current Contact Prints the contact that is currently displayed. Print Range Marked Contacts Prints the contacts marked in the Record View. Check the check box at the left end of the field to mark the contact. Prints the contacts designated by the range specified in the From and To Contact Range boxes. 38 Printing the Label Appendix