Brother International ™ QL-720NW Quick Setup Guide - English and Spa - Page 17
Setting the DK Roll
View all Brother International ™ QL-720NW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
9 4 Setting the DK Roll 1 Press and hold the ON/OFF button ( ) to turn the QL-710W/720NW off. Hold the Brother QL-710W/720NW by the front of the machine, and firmly lift the DK Roll compartment cover to open the cover. 2 Put the spool into the spool guides in the DK Roll compartment. • Make sure that the spool arms are inserted firmly in the spool guides on the left and right. • Insert the spool with the DK Roll into the spool guide located on the right hand side of the Brother QL-710W/720NW. 3 Thread the end of the DK Roll into the slot until it align to the area shown on the right. Align the end of the roll with the upright edge of the label output slot. 4 Close the DK Roll compartment cover. When you press the ON/OFF button ( ) to turn the Brother QL-710W/720NW on, the end of the DK Die-cut Label is aligned automatically.