Brother International BES-1260BC Instruction Manual - English - Page 144
Thread Trimming, Select [Thread Trimming] from Settings menu., Set inching, thread length, etc.
View all Brother International BES-1260BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Chapter 6 Embroidering Thread Trimming s The following items can be set: Enable inching Hoop movement after thread trimming Sets inching motion for thread trimming. Sets the needle penetration length for trimming. The length can be set in inches. To set the length in inch unit, select [Inch] from the [Configuration] of Tool menu. The available values are as follows: For mm 0 - 100 mm (The standard value is 15 mm.) For inch 0 - 3.9 inch (The standard value is 0.6 inch.) Thread length (1-10) for all machines Sets the overall thread amount through the needle. Value of 1 to 10 can be set. The smaller the value is, the shorter the length is. Thread length after thread trimming Sets the overall thread amount through the needle. Value of 1 to 10 can be set. The smaller the value is, the shorter the length is. 1. Select [Thread Trimming] from Settings menu. 2. Set inching, thread length, etc. 3. Click [OK]. BES-960BC • BES-1260BC 149