Brother International BES-1260BC Instruction Manual - English - Page 31
Fix the legs and the table using the F table stays A 3 pcs., and B 2 pcs., while the F, table R
View all Brother International BES-1260BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 2 Preparation of Embroidery Machine u y o !0 t !0 9. Fix the legs and the table using the F table stays A (3 pcs.) o and B (2 pcs.) !0 while the F table R t, M (2 pcs.) y, and L u are fixed at the upper position. * Dismounting can be carried out in the reverse procedures. Note) • Use two F table stays (B) with one notch at both ends of the F table R t and L u. • When mounting the F table stays A (3 pcs.) o and B (2 pcs.) !0, fit the F table stay notch into the table, then fix the notch to the legs using the thumb bolts. Dismounting can be carried out in the reverse procedures. • When the F table is at the lower position, the F table stays A and B need not be used. 36 BES-960BC • BES-1260BC
Chapter 2
Preparation of Embroidery Machine
BES-960BC
•
BES-1260BC
36
!
0
o
u
y
t
!
0
9.
Fix the legs and the table using the F table stays A (3 pcs.)
o
and B (2 pcs.)
!0
while the F
table R
t
, M (2 pcs.)
y
, and L
u
are fixed at the upper position.
* Dismounting can be carried out in the reverse procedures.
Note)
• Use two F table stays (B) with one notch at both ends of the F table R
t
and L
u
.
• When mounting the F table stays A (3 pcs.)
o
and B (2 pcs.)
!0
, fit the F table stay notch into the table,
then fix the notch to the legs using the thumb bolts.
Dismounting can be carried out in the reverse procedures.
• When the F table is at the lower position, the F table stays A and B need not be used.