Brother International BES-1260BC Instruction Manual - English - Page 230

Personal Computer Section Chapter 12 Trouble Shooting Check these points once again Trouble Check Point sThe power lamp does not light up when the computer power switch is turned on. • Is the cable correctly plugged in the computer? • Is the AC line live? sThe display does not light up when the computer power switch is turned on. • Is the display power lamp on? • Is the display's cable correctly connected? • Is the display's contrast correctly adjusted? s"Windows" cannot be started. • Is a floppy disk inserted? s"Windows" can be started but the embroidery software cannot. • Is the selection of other icons possible? • Is the selected icon correct? • Can you double-click more quickly? sThe window does not open though the machine power is turned on? • Is the cable to the machine and the interface board correctly connected? • Is the interface board attached properly? (Refer to Page 40.) • Is the correct COM port selected? (Refer to Page 127.) sThe screen changes when the • The screen saver is preset. Invalidate this function on the control mouse is not operated for a while. panel screen. Do not validate the power-saving function. sThe screen of the editor, the explorer or the production report disappears during operation. • The machine controller screen was clicked so that the current screen is hidden behind it. Move the mouse to the bottom of the screen and select the program (editor, explorer, or production report). sColors set for a design and threads are not available. • The number of colors is set to 256. Increase the number to 65000 or more on the control panel screen. BES-960BC • BES-1260BC 235