Brother International BES-1260BC Instruction Manual - English - Page 146
Thread Breakage Sensor, Select [Thread Breakage Sensor] from Setting menu.
View all Brother International BES-1260BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Chapter 6 Embroidering Thread Breakage Sensor The sensor for thread breakage can be turned ON/OFF or the sensor sensitivity for each needle bar can be set. s The sensitivity can be set within the range of 1 - 100. The smaller the value is, the higher the sensitivity is. 1. Select [Thread Breakage Sensor] from Setting menu. 2. Click the head you want to disable the sensor and remove the check mark (√). 3. Adjust the sensor sensitivity. 4. Click [OK]. The sensor sensitivity for each needle bar is adjusted individually. All sensor sensitivities for all needle bars are adjusted simultaneously. BES-960BC • BES-1260BC 151
BES-960BC
•
BES-1260BC
151
Chapter 6
Embroidering
Thread Breakage Sensor
The sensor for thread breakage can be turned ON/OFF or the sensor sensitivity for
each needle bar can be set.
■
The sensitivity can be set within the range of 1 - 100.
The smaller the value is,
the higher the sensitivity is.
1.
Select [Thread Breakage Sensor] from Setting menu.
2.
Click the head you want to disable the sensor and remove the check mark (
√
).
3.
Adjust the sensor sensitivity.
4.
Click [OK].
The sensor sensitivity
for each needle bar is
adjusted individually.
All sensor sensitivities
for all needle bars are
adjusted simultaneously.