Brother International BES-1260BC Instruction Manual - English - Page 206
Loosen two screws, and remove the arm
View all Brother International BES-1260BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
Chapter 9 Maintenance s Grease the places indicated by the arrow once in six months. (Note) When greasing, be sure to use the grease tank BR2 (black) provided with the machine. u i u !1 !2 y t o w q r o e !0 q r BES-960BC 1. Remove two connectors from the rear of the needle bar case. 2. Loosen four bolts q , and remove the needle case w. 3. Loosen three screws e, and remove the presser foot guide plate r. 4. Loosen two screws t, and remove the arm cover L y. 5. Loosen four screws u, and remove the head cover i. 6. Loosen two bolts o, and remove the cap eaves guide !0. 7. Loosen three bolts !1, and remove the wiper solenoid assembly !2. q q q q q w 8. Remove the screws at the places indicated q by the arrow, insert grease into the tapped hole using the syringe. Then tighten the bols. e t w !3 !4 r 9. After greasing, assemble in the reverse order. (Note) • When assembling the needle bar case w, place it on the machine and turn the change pulley !4 behind the cover !3 at right. Check that it is engaged, and then tighten the bolts. • When attaching the presser foot guide plate r, move the presser foot up and down by the retracting lever to check that is it not distorted. For more information, refer to the illustration in step 6 on page 209. BES-960BC • BES-1260BC 211