Brother International BES-1260BC Instruction Manual - English - Page 42
Replacement of Bobbin, through the notch
View all Brother International BES-1260BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 2 Preparation of Embroidery Machine 3-2 Replacement of Bobbin Note) Remove dust, lint and oil from the bobbin case before replacement. s Removing bobbin case w 1. Open the rotary hook cover B q. 2. Hold the knob w and take out the bobbin case. 3. Close the knob and take out the bobbin e. q e s Replacing bobbin Pull out by about 50 mm t r 1. Put a new bobbin in the bobbin case. 2. Slide the thread under the tension spring t through the notch r. 3. Pull out the thread from the hole of the tension spring t. 4. Pull out the thread by about 50 mm. s Attaching bobbin case w 1. Hold the knob w and attach the bobbin case securely. 2. Close the rotary hook cover B q. q BES-960BC • BES-1260BC 47
Chapter 2
Preparation of Embroidery Machine
BES-960BC
•
BES-1260BC
47
w
w
q
q
e
3-2 Replacement of Bobbin
Note)
Remove dust, lint and oil from the bobbin case before replacement.
■
Removing bobbin case
1.
Open the rotary hook cover B
q
.
2.
Hold the knob
w
and take out the bobbin
case.
3.
Close the knob and take out the bobbin
e
.
■
Replacing bobbin
1.
Put a new bobbin in the bobbin case.
2.
Slide the thread under the tension spring
t
through the notch
r
.
3.
Pull out the thread from the hole of the
tension spring
t
.
4.
Pull out the thread by about 50 mm.
■
Attaching bobbin case
1.
Hold the knob
w
and attach the bobbin
case securely.
2.
Close the rotary hook cover B
q
.
Pull out by about
50 mm
r
t