Brother International BES-1260BC Instruction Manual - English - Page 179
Inching Mode during Embroidering Forcible Hoop Movement, START
View all Brother International BES-1260BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Chapter 7 Operation of Machine 8-2 Inching Mode during Embroidering (Forcible Hoop Movement) 1. Press the jog switch V while pressing the "STOP" switch and "AJST" is displayed. 2. Press the jog switch S to forcibly change the hoop. "JOG" is displayed. 3. Press the "START" switch and press the jog switch. The hoop moves to the direction of the pressed switch. START Note) • Note that the forcible hoop movement will produce deviation of embroidering by the amount. • If the hoop and material are deviated from each other during embroidering, correct it by using the jog switches. 4. Pressing the STOP switch resets the inching mode. 5. Press the START switch restarts embroidering. STOP START 184 BES-960BC • BES-1260BC
Chapter 7
Operation of Machine
BES-960BC
•
BES-1260BC
184
8-2 Inching Mode during Embroidering (Forcible Hoop Movement)
1.
Press the jog switch
u
while
pressing the "STOP" switch
and "AJST" is displayed.
2.
Press the jog switch
r
to forcibly change
the hoop.
"JOG" is displayed.
3.
Press the "START" switch and press the jog
switch.
The hoop moves to the direction of
the pressed switch.
Note)
• Note that the forcible hoop movement will
produce deviation of embroidering by the
amount.
• If the hoop and material are deviated from
each other during embroidering, correct it
by using the jog switches.
4.
Pressing the STOP switch
resets the inching mode.
5.
Press the START switch
restarts embroidering.
STOP
START
START