Brother International BES-1260BC Instruction Manual - English - Page 50
Bed Retract, to the right
View all Brother International BES-1260BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 2 Preparation of Embroidery Machine 3-5 Bed Retract When embroidery within the maximum area by mounting the tubular square hoop, there is a possibility that the hoop interferes with the bed. Retract the bed of several machine heads to avoid interference. Note) The machine heads are numbered 1 ~ 6 from the right side. q e w No.6 No.4 No.2 r 1. Loosen two bolts w that secure the bed support q, and move the bolts w to the right and left. Note) • The bed is secured by two bolts and supported at three places. • When loosening the bolts, support the bed by hand. 2. Lower the machine bed e slowly until it comes into contact with the leg. 3. Tighten the bolts w again. BES-960BC • BES-1260BC 55
Chapter 2
Preparation of Embroidery Machine
BES-960BC
•
BES-1260BC
55
3-5 Bed Retract
When embroidery within the maximum area by mounting the tubular square hoop, there is a
possibility that the hoop interferes with the bed.
Retract the bed of several machine heads to
avoid interference.
Note)
The machine heads are numbered 1 ~ 6 from the right side.
No.6
No.4
No.2
e
w
q
1.
Loosen two bolts
w
that secure the bed support
q
, and move the bolts
w
to the right and
left.
Note)
• The bed is secured by two bolts and supported at three places.
• When loosening the bolts, support the bed by hand.
2.
Lower the machine bed
e
slowly until it comes into contact with the leg.
3.
Tighten the bolts
w
again.
r