Brother International BES-963 Instruction Manual - English - Page 133
Jog Embroidering, 5. Hoop Feed Position
View all Brother International BES-963 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
4. Jog Embroidering Chapter 6 Operation of Machine BES-963BC BES-1263BC • Jog embroidering can be used for preventing the thread from slipping from the needle at the start of embroidering. • Jog embroidering can be executed as long as the start switch at the machine head is held down. Note) Never apply a tape on the switch to keep jog operation for a long time. Doing so may cause damage to the machine. 5. Hoop Feed Position • In order to ease mounting and dismounting of the embroidery hoop, another needle position can be set as a hoop feed position in the movable area additionally to the current needle position. • In order to ease material attachment while operation is suspended, the hoop can be moved to the feed position at any time by the hoop feed switch. • The hoop can also be moved to the feed position automatically after embroidering is finished. Refer to "Hoop Automatic Retract" on Page 104 for details. BES-963BC • BES-1263BC 131