Brother International BES-963 Instruction Manual - English - Page 134
Area Check, 6-1 External Tracing, 6-2 Automatic Hoop Movement in Area
View all Brother International BES-963 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Chapter 6 Operation of Machine 6. Area Check 6-1 External Tracing • If the check switch is pressed in other cases than "area over", the rectangular outline of the pattern is traced. Embroidering start position Note) The outline of pattern can be checked in rectangle or octagon by setting "Checking embroidery area" in "Enviromment 1". 6-2 Automatic Hoop Movement in Area 0.1mm (Example) 0.1mm Embroidering area • If "area over" is displayed, press the check switch. The hoop automatically moves inside the embroidering area, where the pattern is set, at the nearest position. Note) After finishing the movement inside the area by this function, execute external tracing. Then, check that the needle and the presser foot do not interfere with the hoop before starting embroidering. Embroidering area If the pattern is not held in the embroidering area as shown below, the hoop cannot move into the area. Enlarge the embroidering area on the operation panel. 132 BES-963BC • BES-1263BC