Brother International BES-963 Instruction Manual - English - Page 157
Adjustment of Presser Foot Height
View all Brother International BES-963 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Chapter 8 Adjustment 6. After timing adjustment the is finished for each head, set the pulley B q to the stop position (at 100˚ of the scale) and press ESC . The machine enters the standby state. The adjustment of the rotary hook is completed and the timing is stored. The rotary hook returns to the stop position accordingly. 5. Adjustment of Presser Foot Height w q material 1. Turn the power switch off. 2. Select the needle bar No. 1. 3. Loosen the screw w of the presser foot q, and adjust the presser foot q until it comes above the cloth top surface when it is at the alignment position (where the pulley B indication mark " " and the cover indication mark " " are aligned). Note) When the presser feet have been adjusted in height, check that each needle lowers to the center of the presser foot hole. BES-963BC • BES-1263BC 155