Brother International BES-963 Instruction Manual - English - Page 36

Chapter 1 Preparation of Embroidery Machine 3. Pass the thread through the upper hole of the 2nd pretension. Push up the thread guide tension disc with your finger, and pass it from the left to the lower hole. Wind the thread clockwise twice around thread breakage pulley e. 4. Pass the thread through the hole of upper thread guide(upper) r. Wind the thread clockwise once around the rotary tension disc and place it on the spring. 5. Pass the thread through each hole of upper thread guide(middle) t and thread guide y. 6. After passing the thread through the hole of thread guide y, insert the thread into the right side of the inner thread guide and pass it through the hole of the thread take-up. 7. Bring the thread back to the inner thread guide. Insert the thread into the hole from the upper section into thread guide A u. 8. Pass the thread through the hole of the needle bar thread guide o and pass it through the needle eye. Do not pass it through the presser foot. Pass it to presser spring at the front of lower thread guide i. BES-1263BC q eThread breakage pulley rUpper thread guide (upper) tUpper thread guide (middle) wThread guide tension disc Needle Bar No.3,6,9,12 No.2,5,8,11 No.1,4,7,10 yThread guide Rotary tension Spring disc uThread guide A Inner thread guide uThread guide A iLower thread guide iLower thread guide oNeedle bar thread guide 34 BES-963BC • BES-1263BC