Brother International CE-5500/CE-5500PRW Operation Manual - Page 25
Removing the presser foot, holder
View all Brother International CE-5500/CE-5500PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Press the black button to release the presser d foot. a Black button Place a different presser foot below the presser e foot holder so that the presser foot pin is aligned with the shank in the holder. Position the presser foot so the letter indicating the presser foot type (J, A, etc.) is positioned to be read. a Presser foot holder b Shank c Pin Note ● The presser foot to be used with each stitch appears in the LCD. To select a stitch, refer to "Selecting a stitch" (page 24). Slowly lower the presser foot lever so that the f presser foot pin snaps into the shank. a Presser foot lever b Shank c Pin The presser foot is attached. Raise the presser foot lever to check that the g presser foot is securely attached. Removing the presser foot holder Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the 1 quilting foot. Use the disc-shaped screwdriver to remove the presser foot holder. Remove the presser foot. (Refer to page 22.) a Loosen the presser foot holder screw. b a Disc-shaped screwdriver b Presser foot holder c Presser foot holder screw ■ Attaching the presser foot holder Align the presser foot holder with the lower-left a side of the presser bar. a Presser foot holder b Presser bar c Presser foot holder screw Holding the presser foot holder in place, tighten b the screw. Note ● If the presser foot holder is not correctly installed, the thread tension will be incorrect. CAUTION ● Be sure to securely tighten the presser foot holder screw, otherwise the presser foot holder may fall off and the needle may strike it, causing the needle to bend or break. 23