Brother International CE-5500/CE-5500PRW Operation Manual - Page 33

Reverse the skirt or pants. a 2 a Wrong side of fabric b Right side of fabric 1 4 c Edge of fabric d Bottom side 3 Fold the fabric along the desired edge of the b hem, and press. 2 1 a Wrong side of fabric b Right side of fabric c Edge of fabric 4 d Desired edge of hem 13 2 1 2 3 Use a chalk to mark on the fabric about 5 mm c (3/16 inch) from the edge of the fabric, and then baste it. 3 5 6 a Wrong side of fabric b Right side of fabric c Edge of fabric d Desired edge of hem 4 e 5 mm (3/16 inch) 1 2 f Basting 1 2 1 2 Fold back the fabric inside along the basting. d a Wrong side of fabric 3 5 b Right side of fabric c Edge of fabric 4 6 d Desired edge of hem e 5 mm (3/16 inch) 1 2 f Basting g Basting point 1 7 1 Unfold the edge of fabric, and position the e fabric with the wrong side facing up. 4 1 6 1 1 a Wrong side of fabric b Right side of fabric 3 c Edge of fabric d Desired edge of hem 1 e Basting point f Basting 1 5 2 Attach blind hem foot "R". f 3 Select a stitch. g Remove the flat bed attachment and make freeh arm sewing possible. • For details on free-arm sewing, refer to "Stitching cylindrical pieces" (page 28). Slide the part that you wish to sew onto the arm, i make sure that the fabric feeds correctly, and then start sewing. a Arm Position the fabric with the edge of the folded j hem against the guide of the presser foot, and then lower the presser foot lever. a Wrong side of fabric b Fold of hem c Guide 31