Brother International DCP-130C Users Manual - English - Page 23

Chapter 1 Scanning area 1 The scanning area depends on the settings in the application you are using. The figures below show the areas you cannot scan on paper. 3 4 1 2 Usage Copy Scan Document Size Letter A4 Letter A4 Top (1) Bottom (2) 0.12 in. (3 mm) 0.12 in. (3 mm) 0.12 in. (3 mm) 0.12 in. (3 mm) Left (3) Right (4) 0.12 in. (3 mm) 0.12 in. (3 mm) 0.12 in. (3 mm) 00 in. (0 mm) Acceptable paper and other media 1 The print quality can be affected by the type of paper you are using in the machine. To get the best print quality for the settings you have chosen, always set the Paper Type to match the type of paper you load. You can use plain paper, inkjet paper (coated paper), glossy paper, transparencies and envelopes. We recommend testing various paper types before buying large quantities. For best results, use the Brother paper. „ When you print on inkjet paper (coated paper), transparencies and photo paper, be sure to choose the proper media in the 'Basic' tab of the printer driver or in the Paper Type setting of the menu. „ When you print on Brother photo paper, load the instruction sheet included with the photo paper in the paper tray first, and then put the glossy paper on top of the instruction sheet. „ When you use transparencies or photo paper, remove each sheet at once to prevent smudging or paper jams. „ Avoid touching the printed surface of the paper immediately after printing; the surface may not be completely dry and may stain your fingers. 10