Brother International DCP-130C Users Manual - English - Page 73
Near Empty, Did You Change Blck?, Ink Empty, Install, CAUTION - reset
UPC - 012502615699
View all Brother International DCP-130C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
e Each color has its own correct position. Insert the ink cartridge in the direction of the arrow on the label. M brother XXXX f Lift each lock release lever and push it until it clicks, and then close the ink cartridge cover. g If you replaced an ink cartridge while the LCD showed Near Empty, the LCD may ask you to verify that it was a brand new one. (For example, Did You Change Blck?) For each new cartridge you installed, press a (Yes) to automatically reset the ink dot counter for that color. If the ink cartridge you installed is not a brand new one, be sure to press b (No). If you wait until the LCD shows Ink Empty, the machine will automatically reset the ink dot counter. Note If the LCD shows Install after you install the ink cartridges, check that the ink cartridges are installed properly. WARNING If ink gets in your eyes, wash them out with water at once and call a doctor if you are concerned. CAUTION DO NOT take out ink cartridges if you do not need to replace them. If you do so, it may reduce the ink quantity and the machine will not know the quantity of ink left in the cartridge. DO NOT touch the cartridge insertion slots. If you do so, the ink may stain your skin. If ink stains your skin or clothing, wash with soap or detergent at once. If you mix the colors by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation. Once you open an ink cartridge, install it in the machine and use it up within six months of installation. Use unopened ink cartridges by the expiration date written on the cartridge package. DO NOT dismantle or tamper with the ink cartridge; this can cause the ink to leak out of the cartridge. 60