Brother International DCP 585CW Users Manual - English - Page 61

Setting your changes as the new default, Restoring all settings to the factory settings

Page 61 highlights

PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive Setting your changes as the new default 5 You can save the print settings you use most often by setting them as the default settings. These settings will stay until you change them again. a Press a or b to choose your new setting. Press OK. Repeat this step for each setting you want to change. b After changing the last setting, press a or b to choose Set New Default. Press OK. c Press + to choose Yes. d Press Stop/Exit. Restoring all settings to the factory settings 5 You can restore all the settings you have changed to the factory settings. These settings will stay until you change them again. a Press a or b to choose Factory Reset. Press OK. b Press + to choose Yes. c Press Stop/Exit. Scan to a memory card or USB Flash memory drive 5 Entering Scan mode 5 When you want to scan to a memory card or USB Flash memory drive, press (Scan). The LCD shows: Scan to E-mail Scan to Image Scan a document directly to a media 5 Scan to OCR card or USB Scan to File flash Scan to Media memory. SCAN Select & Press OK Press a or b to choose Scan to Media. Press OK. If you are not connected to your computer only the Scan to Media selection will appear on the LCD. (See Scanning for Windows® or Macintosh® in the Software User's Guide on the CD-ROM for details about the other menu options.) 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
49
5
Setting your changes as the
new default
5
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press
a
or
b
to choose your new setting.
Press
OK
.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
a
or
b
to choose
Set New Default
.
Press
OK
.
c
Press
+
to choose
Yes
.
d
Press
Stop/Exit
.
Restoring all settings to the
factory settings
5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press
a
or
b
to choose
Factory Reset
.
Press
OK
.
b
Press
+
to choose
Yes
.
c
Press
Stop/Exit
.
Scan to a memory card
or USB Flash memory
drive
5
Entering Scan mode
5
When you want to scan to a memory card or
USB Flash memory drive, press
(
Scan
).
The LCD shows:
Press
a
or
b
to choose
Scan to Media
.
Press
OK
.
If you are not connected to your computer
only the Scan to Media selection will appear
on the LCD.
(See
Scanning
for Windows
®
or Macintosh
®
in the Software User’s Guide on the CD-ROM
for details about the other menu options.)
Scan to Image
Scan to Image
SCAN
Scan to OCR
Scan to OCR
Scan to File
Scan to File
Scan to E-mail
Scan to E-mail
Scan to Media
Scan to Media
Select & Press
OK
Scan a document
Scan a document
directly to a media
directly to a media
card or USB
card or USB
flash
flash
memory.
memory.