Brother International DCP 585CW Users Manual - English - Page 86

Stop/Exit, Error Message, Cause, Action, Media is Full. - ink cartridges

Page 86 highlights

Error Message Cannot Print Replace Ink Cover is Open Data Remaining High Temperature Hub is Unusable. Image Too Long. Image Too Small. Ink low Low Temperature Media Error Media is Full. No Cartridge No File Cause Action One or more of the ink cartridges Replace the empty ink cartridges. (See are empty. The machine will stop Replacing the ink cartridges on page 78.) all print operations. The scanner cover is not closed Lift the scanner cover and then close it completely. again. The ink cartridge cover is not completely closed. Firmly close the ink cartridge cover until it clicks. Print data is left in the machine's Press Stop/Exit. The machine will cancel memory. the job and clear it from the memory. Tray to print again. The print head is too warm. Allow the machine to cool down. A Hub or USB Flash memory drive with Hub has been connected to the USB direct interface. A Hub or USB Flash memory drive with Hub are not supported. Unplug the device from the USB direct interface. The proportions of your photo Choose a regularly proportioned image. are irregular so effects could not be added. The size of your photo is too small to trim. Choose a larger image. One or more of the ink cartridges are running out of ink. Order a new ink cartridge. You can continue printing until the LCD shows Cannot Print. (See Ordering accessories and supplies on page ii and Replacing the ink cartridges on page 78.) The print head is too cold. Allow the machine to warm up. The memory card is either corrupted, improperly formatted, or there is a problem with the memory card. Put the card firmly into the slot again to make sure it is in the correct position. If the error remains, check the media drive (slot) of the machine by putting in another memory card that you know is working. The memory card or USB Flash memory drive you are using already contains 999 files. Your machine can only save to your memory card or USB Flash memory drive if it contains less than 999 files. Try deleting unused files to free some space and try again. An ink cartridge is not installed properly. Take out the ink cartridge and re-install it slowly until it clicks. (See Replacing the ink cartridges on page 78.) The memory card or USB Flash Put the correct memory card or USB Flash memory drive in the media drive memory drive into the slot again. does not contain a .JPG file. 74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

74
Cannot Print
Replace Ink
One or more of the ink cartridges
are empty. The machine will stop
all print operations.
Replace the empty ink cartridges. (See
Replacing the ink cartridges
on page 78.)
Cover is Open
The scanner cover is not closed
completely.
Lift the scanner cover and then close it
again.
The ink cartridge cover is not
completely closed.
Firmly close the ink cartridge cover until it
clicks.
Data Remaining
Print data is left in the machine's
memory.
Press
Stop/Exit
. The machine will cancel
the job and clear it from the memory. Tray
to print again.
High Temperature
The print head is too warm.
Allow the machine to cool down.
Hub is Unusable.
A Hub or USB Flash memory
drive with Hub has been
connected to the USB direct
interface.
A Hub or USB Flash memory drive with
Hub are not supported. Unplug the device
from the USB direct interface.
Image Too Long.
The proportions of your photo
are irregular so effects could not
be added.
Choose a regularly proportioned image.
Image Too Small.
The size of your photo is too
small to trim.
Choose a larger image.
Ink low
One or more of the ink cartridges
are running out of ink.
Order a new ink cartridge. You can
continue printing until the LCD shows
Cannot Print
. (See
Ordering
accessories and supplies
on page ii and
Replacing the ink cartridges
on page 78.)
Low Temperature
The print head is too cold.
Allow the machine to warm up.
Media Error
The memory card is either
corrupted, improperly formatted,
or there is a problem with the
memory card.
Put the card firmly into the slot again to
make sure it is in the correct position. If the
error remains, check the media drive (slot)
of the machine by putting in another
memory card that you know is working.
Media is Full.
The memory card or USB Flash
memory drive you are using
already contains 999 files.
Your machine can only save to your
memory card or USB Flash memory drive
if it contains less than 999 files. Try
deleting unused files to free some space
and try again.
No Cartridge
An ink cartridge is not installed
properly.
Take out the ink cartridge and re-install it
slowly until it clicks. (See
Replacing the ink
cartridges
on page 78.)
No File
The memory card or USB Flash
memory drive in the media drive
does not contain a .JPG file.
Put the correct memory card or USB Flash
memory drive into the slot again.
Error Message
Cause
Action