Brother International DCP 585CW Users Manual - English - Page 89

Stop/Exit, Close the Jam Clear Cover.

Page 89 highlights

e Close the Jam Clear Cover. Make sure the cover is closed properly. Troubleshooting and Routine Maintenance Note • If the paper has stopped in the print head, unplug the machine from the power source, and then move the print head to take out the paper. • If the print head is at the right corner like the illustration, you cannot move the print head. Press Stop/Exit till print head moves to the middle. Then unplug the machine from the power source, and take out the paper. f Lift the scanner cover (1) from the front side of the machine until it locks securely into the open position. Make sure that there is no jammed paper left inside the machine. 1 • If ink gets on your skin or clothing immediately wash it off with soap or B detergent. g Lift the scanner cover to release the lock (1). Gently push the scanner cover support down (2) and close the scanner cover (3) using both hands. 1 2 3 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

Troubleshooting and Routine Maintenance
77
B
e
Close the Jam Clear Cover.
Make sure the cover is closed properly.
f
Lift the scanner cover (1) from the front
side of the machine until it locks
securely into the open position.
Make sure that there is no jammed
paper left inside the machine.
Note
If the paper has stopped in the print head,
unplug the machine from the power
source, and then move the print head to
take out the paper.
If the print head is at the right corner like
the illustration, you cannot move the print
head. Press
Stop/Exit
till print head
moves to the middle. Then unplug the
machine from the power source, and take
out the paper.
If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
g
Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3) using both hands.
1
1
2
3