Brother International Innov-is 40e Operation Manual - Page 24
guide cover with your left hand.
View all Brother International Innov-is 40e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
GETTING READY While holding the spool with your right hand, i and then pass the thread under the thread guide. Slide the thread into the thread take-up lever l from the right to the left. a 1 a Thread guide Pass the thread under the thread guide cover j from the back to the front. Hold the thread with your right hand so that there is no slack in the thread that is pulled out, and then pass the thread under the thread guide cover with your left hand. a Thread take-up lever Memo ● If the needle is not raised, the thread takeup lever cannot be threaded. Be sure to press the needle position button to raise the needle before threading the thread take-up lever. Pass the thread behind the needle bar thread m guide. The thread can easily be passed behind the needle bar thread guide by holding the thread in your left hand, and pulling the thread into the guide from right to left. a a Thread guide cover Thread the machine by guiding the thread k along the path indicated by the number on the machine. a a Needle bar thread guide Lower the presser foot lever. n a a Presser foot lever 22