Brother International Innov-is 40e Operation Manual - Page 27
break or the machine may be damaged.
View all Brother International Innov-is 40e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Thread the upper thread for the right side in f the same way that the upper thread for the Select a stitch. j • For details on selecting a stitch, refer to left side was threaded. "Selecting a stitch" (page 40). • For details on the stitches that can be sewn 1 with the twin needle, refer to "Stitch settings" (page 86). 1 a Thread guide cover • For details, refer to step i through l of "Threading the upper thread" (page 20). Without passing the thread through the g needle bar thread guide, manually thread the right needle. Pass the thread through the eye of the needle from the front to the back. CAUTION ● After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. Press k (Needle mode selection key). Attach zigzag foot "J". h • For details on changing the presser foot, refer to "Replacing the presser foot" (page 31). CAUTION ● When using the twin needle, be sure to attach zigzag foot "J", otherwise the needle may break or the machine may be damaged. Turn on the sewing machine. i X The twin needle can now be used. • To return to single needle sewing, press (Needle mode selection key). • Even after the sewing machine is turned off, the twin needle setting is not cancelled. CAUTION ● When using the twin needle, be sure to select the twin needle setting, otherwise the needle may break or the machine may be damaged. X The LCD comes on. 25