Brother International Innov-is 40e Operation Manual - Page 39
Sewing Cylindrical or Large Pieces
View all Brother International Innov-is 40e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Sewing Cylindrical or Large Pieces When sewing cylindrical or large pieces of fabric, remove the flat bed attachment. 1 Stitching cylindrical pieces Sewing large pieces of fabric Removing the flat bed attachment makes it easier to sew cylindrical pieces such as cuffs and pant legs. The optional wide table makes sewing large pieces of fabric easier. Pull the flat bed attachment off to the left. a X With the flat bed attachment removed, free-arm sewing is possible. Slide the part that you wish to sew onto the b arm, and then sew from the top. Open up the legs at the bottom of the wide a table. Pull out the four legs until they snap into place. Pull the flat bed attachment off to the left. b When you are finished with free-arm sewing, c install the flat bed attachment back in its original position. 37