Brother International Innov-is 40e Operation Manual - Page 67
Inserting a side zipper
View all Brother International Innov-is 40e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Align the seam with the center of the zipper, e and then baste the zipper in place. b a c Topstitch around the zipper. h a c b d a Wrong side of fabric b Basting stitching c Zipper With the pattern selection dial, f 3 select stitch . Attach the presser foot holder to the right side g of the pin of zipper foot "I". a a Stitching b Right side of fabric c Basting stitching d End of zipper opening CAUTION I b a Right side of the pin b Needle drop point • For details, refer to "Replacing the presser foot" (page 31). CAUTION ● When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break. Remove the basting stitching. i Inserting a side zipper Stitching is sewn on only one piece of fabric. Use this type of zipper for side openings and back openings. ● When using zipper foot "I", be sure to use a center needle position, and slowly turn the handwheel toward you to check that the needle does not touch the presser foot. If a different stitch is selected and the needle hits the presser foot, the needle may bend or break. a b c a Stitching b Right side of fabric c End of zipper opening The following procedure will describe how to stitch on the left side, as shown in the illustration. 65