Brother International Innov-is 40e Operation Manual - Page 97
Hold the thread with your right hand so
![]() |
View all Brother International Innov-is 40e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Raise the presser foot using the presser foot d lever. Pass the thread under the thread guide cover g from the back to the front. Hold the thread with your right hand so that there is no slack in the thread that is pulled out, and then pass the thread under the thread guide cover with your left hand. a Presser foot lever • If the presser foot is not raised, the sewing machine cannot be threaded correctly. Press (needle position button) once or e twice to raise the needle. a a Thread guide cover Thread the machine by guiding the thread h along the path indicated by the number on the machine. 4 a Needle position button • If the needle is not correctly raised, the sewing machine cannot be threaded. Check that the mark on the handwheel points up as shown in the illustration below. If the handwheel is not in this position, be sure to press the needle position button to raise the needle before continuing the procedure. a a Mark on handwheel While holding the spool with your right hand, f pull the thread with your left hand, and then pass the thread under the thread guide. Pass the thread behind the needle bar thread i guide. The thread can easily be passed behind the needle bar thread guide by holding the thread in your left hand, and pulling the thread into the guide from right to left. 1 a Thread guide a a Needle bar thread guide Next, use the needle threader to thread the j needle. Continue with the procedure from step n of "Threading the upper thread" on page 20. 95
![](/manual_guide/products/brother-international-innovis-40e-operation-manual-91ea948/97.png)