Brother International Innov-is 40e Operation Manual - Page 75
Free-motion quilting
View all Brother International Innov-is 40e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Insert the stem of the quilting guide into the a hole at the rear of the walking foot or presser foot holder. Walking foot Free-motion quilting With free-motion quilting, lower the feed dogs (using the feed dog position switch) so that the fabric is not fed. The optional quilting foot is needed for free-motion quilting. Presser foot holder Adjust the stem of the quilting guide so that b the guide aligns with the seam that has already been sewn. Note ● The optional quilting guide is available through your dealer. Note ● Thread the needle manually when using the quilting foot, or only attach the quilting foot 3 after threading the needle using the needle threader. Turn off the sewing machine. a Remove the presser foot and the presser foot b holder. • For details, refer to "Removing the presser foot holder" (page 32). Attach the quilting foot to the presser foot c holder screw. The pin on the quilting foot should be positioned over the needle clamp screw. a c b a Pin on quilting foot b Presser foot holder screw c Needle clamp screw 73