Brother International Innov-is 40e Operation Manual - Page 82
Smocking
![]() |
View all Brother International Innov-is 40e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
UTILITY STITCHES Attach monogramming foot "N". c Sew parallel stitching at intervals of 1 cm (3/8 d inch). 1 Stitch along the edge of the fabric, making d sure not to sew directly on the edge of the fabric. • For better results, apply spray starch onto the fabric and press with a hot iron before it is sewn. Trim along the stitches. e a 1 cm (3/8 inch) • Do not sew reverse/reinforcement stitches or cut the thread. Pull the bobbin threads to create gathers. e Smooth the gathers by ironing them. • Be careful not to cut the stitches. Smocking The decorative stitch created by stitching or embroidering over gathers is called "smocking". It is used to decorate the front of blouses or cuffs. The smocking stitch adds texture and elasticity to fabric. Turn on the machine. a Select the straight stitch, and then adjust the b stitch length to 4.0 mm (3/16 inch) and loosen the thread tension. • For details, refer to "Selecting a stitch" (page 40) and "Adjusting the thread tension" (page 47). Attach zigzag foot "J". c Select stitch or . f Stitch between the straight stitches. g Pull out the threads for the straight stitches. h 80
![](/manual_guide/products/brother-international-innovis-40e-operation-manual-91ea948/82.png)