Brother International Innov-is NQ1300PRW Operation Manual - Page 112
Checking the selected pattern, Changing the pattern size, Changing the stitch density
View all Brother International Innov-is NQ1300PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Sewing the Various Built-in Decorative Patterns Checking the selected pattern When the specified pattern is not displayed on the screen, check the pattern using the following steps. a Select (Check) in the settings screen. Large Small b Press the "-" or "+" key, and confirm the pattern. c Repeat steps a and b. c Press . Memo • The combined pattern can be stored for later use. For details, refer to "Saving a pattern" on page D-9. Changing the stitch density If a satin stitch has been selected, the stitch density can be changed. a Select a satin stitch pattern. Changing the pattern size The size of character stitches (except handwriting font) can be switched between large and small. Depending on your machine model, the size of Handwriting font characters, Decorative stitches, Satin stitches can be also changed. Refer to "Functions available with each model" in the "Basic operations" section.) a Select a stitch. b Display (Size selection) in the settings screen, and select (Large) or (Small). b Select select the (Thread density) in the desired stitch density. settings screen, and Select for coarser stitching, or select for finer stitching. CAUTION • If the stitching density is too fine, depending on the needle, the stitches may be bunched together, causing the needle to break. D-6