Brother International Innov-is NQ1300PRW Operation Manual - Page 113
Changing the pattern length, Changing character spacing, Creating step stitch patterns, For models
View all Brother International Innov-is NQ1300PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Sewing the Various Built-in Decorative Patterns Changing the pattern length The length of one part of a 7 mm satin stitch can be set to one of five sizes. a Select a 7 mm satin stitch pattern. Creating step stitch patterns (For models equipped with step stitch patterns) Decorative stitches can be shifted to the left or right by half the width of the pattern, allowing you to create a step-shaped pattern. (Equipped on some models. Refer to page B-8.) This is called a "step stitch pattern". As an example, the procedure for creating the following pattern is described below. b Select (Elongation) in the settings screen, the desired length from among "1" to "5". and select a Select a decorative stitch. D CHARACTER / DECORATIVE STITCHES b Press . Changing character spacing a Select character stitches. b Select (Character spacing) in the settings screen. c Adjust key. the character spacing by pressing the "-" or "+" The higher the setting, the wider the character spacing will be; the lower the setting, the narrower the character spacing will be. → The next pattern selected is moved half a width to the right. c Select the same pattern. Decorative sewing D-7