Brother International Innov-is NQ1300PRW Operation Manual - Page 27
the thread tension will be incorrect.
View all Brother International Innov-is NQ1300PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Remove the bobbin cover. e Hold the bobbin with your right hand with the thread f unwinding to the left, and hold the end of the thread with your left hand. Then, with your right hand, place the bobbin in the bobbin case. Winding/Installing the Bobbin While lightly holding down the bobbin with your right h hand (1), guide the thread through the slit in the needle plate cover (2) and lightly pull it with your left hand (3). • The thread enters the tension spring of the bobbin case. B GETTING READY Lightly hold down the bobbin with your right hand g (1), and then guide the end of the thread around the tab of the needle plate cover with your left hand (2). While lightly holding down the bobbin with your right i hand (1), continue guiding the thread through the slit with your left hand (2) Then, cut the thread with the cutter (3). 1 Tab CAUTION • Be sure to hold down the bobbin with your finger and unwind the bobbin thread correctly, otherwise the thread may break or the thread tension will be incorrect. Memo • The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated. Note • If the thread is not correctly inserted through the tension-adjusting spring of the bobbin case, it may cause incorrect thread tension. 1 1 Tension-adjusting spring Basic operations B-19