Brother International Innov-is NQ1300PRW Operation Manual - Page 39

Replacing the Presser Foot Replacing the Presser Foot CAUTION • Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the needle may hit the presser foot, causing the needle to bend or break. • Only use presser feet designed specifically for this machine. Use of any other presser foot may result in injuries or damage to the machine. Replacing the presser foot Press (Needle position button) once or twice to a raise the needle. Lower the presser foot. b Press . c • If is pressed while the presser foot is raised, an error message appears. Lower the presser foot. → The screen changes, and all keys and operation buttons are locked (except ). Place a different presser foot below the holder so that f the presser foot pin is aligned with the notch in the holder. B 1 GETTING READY 4 2 J 3 1 Presser foot holder 2 Notch 3 Pin 4 Presser foot type Slowly lower the presser foot lever so that the presser g foot pin snaps into the notch in the presser foot holder. 2 1 3 4 Raise the presser foot lever. d Press the black button at the back of the presser foot e holder. a b 1 Black button 2 Presser foot holder 1 Presser foot lever 2 Presser foot holder 3 Notch 4 Pin → The presser foot is attached. Raise the presser foot lever to check that the presser h foot is securely attached. 1 1 Presser foot lever Press i to unlock all keys and buttons. Basic operations B-31