Brother International Innov-is NQ1300PRW Operation Manual - Page 52

Sewing with free motion mode, For models equipped with free motion mode., Refer to B-8

Get Brother International Innov-is NQ1300PRW PDF manuals and user guides View all Brother International Innov-is NQ1300PRW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Useful Functions Note • (Needle position) in the settings screen, must be set to the down position for the pivot function to be used. When (Needle position) is set in the raised position, cannot be used. The pivot function can only be used with stitches where presser foot J or N is indicated on the screen. If any other stitch is selected, available. is not • Use (Presser foot lifter button) to make sure the presser foot is lowered, and then press the "Start/Stop" button to continue sewing. • If the pivot key is selected, (Presser foot height) setting in the settings screen can not be changed. Select a stitch. a Press b to select the pivot function. Press the "Start/Stop" button to stop the machine at d the point where the sewing direction changes. → The machine stops with the needle in the fabric, and the presser foot is raised. Rotate the fabric, and then press the "Start/Stop" e button. → The presser foot is automatically lowered, and sewing continues. → The key will be lit. Place the fabric under the presser foot with the needle c at the starting point of the stitching, lower the presser foot and then press the "Start/Stop" button. The machine will begin sewing. Memo • If you press the "Start/Stop" button to pause sewing, press it again to continue, reverse stitches (or reinforcement stitches) will not be sewn. Sewing with free motion mode (For models equipped with free motion mode. Refer to page B-8) With free motion mode, the presser foot is raised to the necessary height for free motion sewing. When starting to sew, the internal sensor detects the thickness of the fabric, and the quilting foot is raised to the height specified in the machine settings screen. In free motion mode, lower the feed dogs (using the feed dog position switch) so that the fabric can be moved freely in any direction. ■ Setting the machine to free motion mode Select a stitch pattern. a Select b (Free motion) in the settings screen. Set the free motion mode to "ON" by pressing the "-" c or "+" key. B-44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Useful Functions
B-44
a
Select a stitch.
b
Press
to select the pivot function.
→
The key will be lit.
c
Place the fabric under the presser foot with the needle
at the starting point of the stitching, lower the presser
foot and then press the “Start/Stop” button. The
machine will begin sewing.
d
Press the “Start/Stop” button to stop the machine at
the point where the sewing direction changes.
→
The machine stops with the needle in the fabric, and
the presser foot is raised.
e
Rotate the fabric, and then press the “Start/Stop”
button.
→
The presser foot is automatically lowered, and
sewing continues.
Sewing with free motion mode
(For models equipped with free motion mode.
Refer to page B-8)
With free motion mode, the presser foot is raised to the
necessary height for free motion sewing. When starting to
sew, the internal sensor detects the thickness of the fabric, and
the quilting foot is raised to the height specified in the
machine settings screen.
In free motion mode, lower the feed dogs (using the feed dog
position switch) so that the fabric can be moved freely in any
direction.
■
Setting the machine to free motion mode
a
Select a stitch pattern.
b
Select
(Free motion) in the settings screen.
c
Set the free motion mode to “ON” by pressing the “-”
or “+” key.
Note
•
(Needle position) in the settings screen, must
be set to the down position
for the pivot function
to be used. When
(Needle position) is set in
the raised position,
cannot be used. The
pivot function can only be used with stitches
where presser foot J or N is indicated on the
screen. If any other stitch is selected,
is not
available.
• Use
(Presser foot lifter button) to make sure
the presser foot is lowered, and then press the
“Start/Stop” button to continue sewing.
•
If the pivot key is selected,
(Presser foot
height) setting in the settings screen can not be
changed.
Memo
•
If you press the “Start/Stop” button to pause
sewing, press it again to continue, reverse
stitches (or reinforcement stitches) will not be
sewn.