Brother International Innov-is NQ1300PRW Operation Manual - Page 24
Three spool cap sizes are available, allowing
View all Brother International Innov-is NQ1300PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Winding/Installing the Bobbin Slide the spool cap onto the spool pin. f Slide the spool cap as far as possible to the right, as shown, with the rounded side on the left. CAUTION • If the spool or the spool cap is not installed correctly, the thread may become tangled around the spool pin, causing the needle to break. • Three spool cap sizes are available, allowing you to choose a spool cap that best fits the size of spool being used. If the spool cap is too small for the spool being used, the thread may catch on the slit in the spool or the machine may be damaged. Memo • When sewing with fine, cross-wound thread, use the small spool cap, and leave a small space between the cap and the spool. c b a 1 Spool cap (small) 2 Spool (cross-wound thread) 3 Space • When using thread that winds off quickly, such as transparent nylon thread or metallic thread, place the spool net over the spool before placing the spool of thread onto the spool pin. If the spool net is too long, fold it to fit the size of the spool. 1 2 3 4 1 Spool net 2 Spool 3 Spool cap 4 Spool pin • If a spool of thread whose core is 12 mm (1/2 inch) in diameter and 75 mm (3 inches) high is inserted onto the spool pin, use the thread spool insert (mini king thread spool). 1 Thread spool insert (mini king thread spool) 2 12 mm (1/2 inch) 3 75 mm (3 inches) B-16