Brother International Innov-is NQ1300PRW Operation Manual - Page 67
Changing the needle position
View all Brother International Innov-is NQ1300PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
■ Changing the needle position The needle position used as the baseline is different for the straight stitch (left needle position) and the straight stitch (center needle position). 1 2 1 Straight stitch (left needle position) 2 Straight stitch (center needle position) When the stitch width of the straight stitch (left needle position) is set to its standard setting (0.0 mm), the distance from the needle position to the right side of the presser foot is 12 mm (1/2 inch). If the stitch width is changed (between 0 and 7.0 mm (1/4 inch)), the needle position will also change. By changing the stitch width and sewing with the right side of the presser foot aligned with the edge of the fabric, a seam allowance can be sewn with a fixed width. 1 0.0 2.0 5.5 7.0 3 4 5 6 2 1 Stitch width setting 2 Distance from the needle position to the right side of the presser foot 3 12.0 mm (1/2 inch) 4 10.0 mm (3/8 inch) 5 6.5 mm (1/4 inch) 6 5.0 mm (3/16 inch) • For details, refer to "Setting the stitch width" in the "Basic operations" section. Basic Stitching S Sewing S-7 UTILITY STITCHES