Brother International Innov-is NQ3700D Operation Manual - Page 116
This message is also displayed when the needle plate is removed while
![]() |
View all Brother International Innov-is NQ3700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Troubleshooting Error messages Cause/solution The wireless security information (Authentication method, Encryption method, Network Key) is incorrect. 27 The wireless security information (authentication method/encryption method/ network key (password)) is incorrect. Refer to the table for the [The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine.] error message, and reconfirm the wireless security information (authentication method/encryption method/network key (password)). (page 18) Refer to "How can I find the wireless security information (SSID and network key)" on page 115. 28 The wireless setting is not activated. The wireless network setting is not activated. Activate the wireless network. (page 18) This pattern cannot be loaded as the pattern extends This message is displayed when the sample stitch pattern that you try to add 29 out of the editable area. with the MY CUSTOM STITCH function extends out of the stitching area. Select a different stitch pattern, or delete the existing stitch pattern (point). 30 This pattern cannot be used. This message appears when you try to retrieve a pattern that cannot be used with this machine. 31 This USB media cannot be used. This message is displayed when you try to use incompatible media. Turn off the power and replace the needle This message is displayed when you try to sew with a stitch other than a straight stitch (middle needle position) while the straight stitch needle plate is 32 plate. installed. This message is also displayed when the needle plate is removed while the machine is still turned on. 33 USB media is not loaded. Load USB media. This message is displayed when you try to recall or save a pattern while no USB flash drive is loaded. When the speed controller is set to control the zigzag This message is displayed when the speed control lever is set to control the 34 stitch width, the "Start/Stop" button does not operate. zigzag stitch width, and the "Start/Stop" button is pressed. Set [Width Control] to [OFF] in the settings screen (page 15), or use the foot controller to operate the machine. 35 F** If error message [F**] appears in the LCD while the machine is being used, the machine may be malfunctioning. Contact your authorized Brother dealer or the nearest Brother authorized service center. 114
![](/manual_guide/products/brother-international-innovis-nq3700d-operation-manual-bd00ebd/116.png)