Brother International Innov-is NQ3700D Operation Manual - Page 75
Making Adjustments
View all Brother International Innov-is NQ3700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Making Adjustments Press . a Select a stitch. b Making Adjustments Your stitch pattern may sometimes turn out poorly, depending on the type or thickness of fabric, the stabilizer material used, sewing speed, etc. If your sewing does not turn out well, sew trial stitches using the same conditions as the real sewing, and adjust the stitch pattern as explained below. If the stitch pattern does not turn out well even after making adjustments based on the stitch pattern described below, make adjustments for each stitch pattern individually. Press c to display editing screen, and then press . Memo • This adjustment can be made to (1-35 Quilting stippling stitch), (4-15 eyelet stitch) and stitch patterns from the following categories. 3 The next stitch pattern will move to the right. VARIOUS STITCHES Press a and select (6-80). Press d to display the previous screen, and select the same stitch again. Press e press to display editing screen again, and then . Attach monogramming foot "N" and sew the stitch b pattern. Note • Be sure to use monogramming foot "N". Adjustments may not be made correctly with any other presser foot. Compare the finished stitch pattern to the illustration c of the correct stitch pattern below. The next stitch pattern will move to the left. Press , and then adjust the stitch pattern with the d [Fine Adjust Verti.] or [Fine Adjust Horiz.] displays. (page 1 of the settings screen) Press . f The entered stitch pattern is repeated. If the stitch pattern is bunched: Press in the [Fine Adjust Verti.] display. The displayed value increases each time the key is pressed and the stitch pattern will lengthen. 73