Brother International Innov-is NQ3700D Operation Manual - Page 86
Attaching the embroidery frame
![]() |
View all Brother International Innov-is NQ3700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Embroidering Preparation Place the embroidery sheet on the inner frame. b Line the mark on the fabric up with the base line on the c embroidery sheet. Align the embroidery frame guide with the right edge c of the embroidery frame holder. Place the inner frame with the fabric on the outer d frame and adjust the fabric if needed to align marks on fabric with the embroidery sheet. Remove the embroidery sheet. e 1 Embroidery frame holder 2 Embroidery frame guide Slide the embroidery frame into the holder, making d sure to align the embroidery frame's arrow mark with the one on holder. 1 Arrow mark Lower the frame-securing lever to be level with the e frame to secure the embroidery frame in the embroidery frame holder. Attaching the embroidery frame Note • Wind and insert the bobbin before attaching the embroidery frame making sure to use the recommended bobbin thread. Check that there is enough thread in the bobbin. Press a foot. (Presser foot lifter button) to raise the presser Raise the frame-securing lever. b CAUTION • If the frame-securing lever is not lowered, the following message appears. You cannot start embroidering until you lower the framesecuring lever. 1 Frame-securing lever 2 Carriage 84
![](/manual_guide/products/brother-international-innovis-nq3700d-operation-manual-bd00ebd/86.png)