Brother International Innov-is NQ3700D Operation Manual - Page 63
Zipper/piping insertion
![]() |
View all Brother International Innov-is NQ3700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Utility Stitches Zipper/piping insertion A zipper and piping can be sewn in place. Use adjustable zipper/piping foot (sold separately with some models) ■ Inserting a centered zipper Refer to step a-f of "Inserting a centered zipper" a on page 59. Remove the presser foot and presser foot holder to b attach the screw-on adjustable zipper/piping foot (sold separately with some models). • For details on removing the presser foot holder, refer to "Removing and attaching the presser foot holder" on page 30. Slide the presser foot over either the left or right feed e dog. Left sewing position Right sewing position Change the needle position so that the needle does not f touch the presser foot. For details, refer to "Setting the stitch width/stitch length/"L/R Shift"" on page 38. 1 3 VARIOUS STITCHES 1 Needle drop point Note • Make sure that the thread between the spool and the bobbin is pulled tight. Select a stitch. c No. 1-01 Stitch CAUTION • After adjusting the needle position, slowly turn the handwheel toward you (counterclockwise) and check the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. Securely tighten the positioning screw. g Loosen the positioning screw on the back of the presser d foot. 1 Positioning screw Topstitch around the zipper. h 1 3 1 2 4 1 Stitching 2 Right side of fabric 3 Basting stitching 4 End of zipper opening CAUTION • When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break. Remove the basting stitching. i 61
![](/manual_guide/products/brother-international-innovis-nq3700d-operation-manual-bd00ebd/63.png)