Brother International Innov-is NQ3700D Operation Manual - Page 91
Embroidering a pattern
![]() |
View all Brother International Innov-is NQ3700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Embroidering Embroidering a pattern Embroidery patterns are embroidered with a change of thread after each color. Prepare embroidery thread colors as shown on the a screen. Lower the presser foot, then press the "Start/Stop" d button to start embroidering. After 5-6 stitches, press the "Start/Stop" button again to stop the machine. 1 1 Embroidery color order • Either the thread color name or the thread number appears in this screen, depending on the setting selected in the settings screen. Press to change the setting in the settings screen. For details, refer to "Changing the thread color display" on page 90. Trim the excess thread at the end of the seam. If the e end of the seam is under the presser foot, raise the presser foot, then trim the excess thread. 4 EMBROIDERY • The automatic thread cutting function will cut the thread at the end of embroidering each color. This function is initially turned on. To turn this function off, press key, and then press . Set the embroidery thread, and thread the needle. b • Refer to "Threading the upper thread" on page 24. Raise the presser foot lever and pass the thread through c the embroidery foot hole, and hold it lightly in your left hand. Give the thread a little slack. • If the thread is left at the beginning of the stitching, it may be embroidered over as you continue embroidering the pattern, making it very difficult to remove the excess thread after the pattern is finished. Trim the thread at the beginning. Press the "Start/Stop" button to start embroidering. f Stitching stops automatically with reinforcement after one color has been completed. When automatic thread cutting is set, the thread is cut. CAUTION • Do not let hands or objects hit the carriage while embroidering. The pattern may misalign. • When embroidering on large garments (especially jackets or other heavy fabrics), do not let the fabric hang off the table. Otherwise, the embroidery unit cannot move freely and the embroidery frame may strike the needle, causing the needle to bend or break and possibly cause injury. Place the fabric so that it does not hang off the table or hold the fabric to keep it from dragging. Remove the thread for the first color from the g machine. Repeat the same steps for embroidering the remaining h colors. When the last color is embroidered, a message informing you the embroidering is finished will appear on the display. Press , and the display will return to the initial screen. Cut the excess thread jumps within the color. i 89
![](/manual_guide/products/brother-international-innovis-nq3700d-operation-manual-bd00ebd/91.png)