Brother International Innov-is NQ3700D Operation Manual - Page 39
Pivoting
![]() |
View all Brother International Innov-is NQ3700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Sewing Pivoting If the pivot key is selected, the machine stops with the needle lowered (in the fabric) and the presser foot is automatically raised to an appropriate height when the "Start/Stop" button is pressed. When the "Start/Stop" button is pressed again, the presser foot is automatically lowered and sewing continues. This function is useful for stopping the machine to rotate the fabric. CAUTION • When the pivot key is selected, the machine will begin stitching when the "Start/Stop" button is pressed or the foot controller is pressed down even if the presser foot has been raised by pressing (Presser foot lifter button). Be sure to keep your hands and other items away from the needle, otherwise injuries may occur. Memo • When the pivot key is selected, the height of the presser foot when sewing is stopped can be changed according to the type of fabric being sewn. Press to display [Pivoting Height] in the settings screen. Press or to select the height. Select a stitch. a Press b to select the pivot function. The key appears as . Set the fabric in the start position, lower the presser c foot and needle, and then press the "Start/Stop" button to start sewing. Press the "Start/Stop" button to stop the machine at d the point where the sewing direction changes. The machine stops with the needle in the fabric, and the presser foot is raised. Rotate the fabric, and then press the "Start/Stop" e button. SEWING BASICS 2 The presser foot is automatically lowered, and sewing continues. Note • The [Needle Position - Up / Down] in the settings screen, must be set to the down position for the pivot function to be used. When [Needle Position - Up / Down] is set in the raised position, the pivot function cannot be used. • If appears as light gray when the stitch pattern was selected, the pivot function cannot be used. • Use (Presser foot lifter button) to make sure the presser foot is lowered, and then press the [Start/ Stop] button to continue sewing. • If the pivot key is selected, and beside [Presser Foot Height] in the settings screen are not available and the setting cannot be changed. 37
![](/manual_guide/products/brother-international-innovis-nq3700d-operation-manual-bd00ebd/39.png)