Brother International Innov-is NQ3700D Operation Manual - Page 81
Embroidery
![]() |
View all Brother International Innov-is NQ3700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
4 Chapter EMBROIDERY Embroidering Preparation Embroidering Preparation Follow the steps below to prepare the machine for embroidery. Step 9 Step 3 Step 1, 2 Step 4 Step 5 Step 6 Step 7, 8 Step Aim # Action 1 Presser foot attachment Attach embroidery foot "U". 2 Checking the needle Use needle for embroidery. 3 Embroidery unit Attach the embroidery unit. attachment 4 Bobbin thread setup For the bobbin thread, wind embroidery bobbin thread and set it in place. 5 Fabric preparation Attach a stabilizer material to the fabric, and hoop it in the embroidery frame. 6 Embroidery frame attachment Attach the embroidery frame to the embroidery unit. 7 Pattern selection Select an embroidery pattern. 8 Checking the layout Check and adjust the size and position of the embroidery. 9 Embroidery thread setup Set up embroidery thread according to the pattern. Page 79 28 80 20 82 84 85 88 89 Attaching the embroidery foot CAUTION • Be sure to use embroidery foot when doing embroidery. Using another presser foot may cause the needle to strike the presser foot, causing the needle to bend or break and possibly cause injury. Press a (Needle position button) to raise the needle. Press . b • When the message [OK to automatically lower the presser foot? ] appears on the LCD screen, press to continue. The screen changes, and all keys and operation buttons are locked (except ). Remove the presser foot and presser foot holder. c • For details, refer to "Replacing the Presser Foot" on page 29. EMBROIDERY 4 Attach embroidery foot "U" so that the presser foot d holder screw fits into the notch in the foot. • Make sure that embroidery foot "U" is vertical when it is installed. 79
![](/manual_guide/products/brother-international-innovis-nq3700d-operation-manual-bd00ebd/81.png)