Brother International PS-2250 User Manual - French - Page 66
BUILT-IN STITCHES, Blind Hem Stitching, Puntadas invisibles
View all Brother International PS-2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
TABLE OF CONTENTS KNOWING YOUR SEWING MACHINE Blind Hem Stitching Pattern (Blind Hem Stitch) Stitch Length F-2 (Stretch Blind Hem Stitch) F-1.5 Stitch Width 3-6.5 The Blind Hem Stitch is used to finish the edge of a project like the hem of a pair of pants without the stitch showing. Use the Blind Hem Stitch for any non-stretch fabrics and the Stretch Blind Hem Stitch for stretch fabrics. 1. Both the threads should be the same color as the fabric. 2. Fold back the fabric to the desired location of the hem as shown in fig. A. Then, fold the edge of the fabric as in fig. B. Leave a 6 mm (15/64") overlap at the edge. 3. Set the Pattern Selection Dial to Blind Hem Stitch or Stretch Blind Hem Stitch and set the stitch length and width. 4. Sew on the fold as in fig. C. 5. When the fabric is unfolded you will have a Blind Stitch hem as shown in fig. D. 1 Right side of fabric 2 Wrong side of fabric NOTE: The Stretch Blind Hem Stitch is useful for stretch fabrics. STRAIGHT AND ZIGZAG STITCHING BUILT-IN STITCHES BUTTONHOLE AND BUTTON SEWING USING ATTACHMENTS AND APPLICATIONS Surjer Puntadas invisibles Modèle de point (Point ourlet invisible) (Point élastique invisible) Longueur de point F-2 F-1,5 Largeur de point 3-6,5 Le point d'ourlet invisible sert à terminer le bord d'un ouvrage, comme le bas de pantalons, sans que le point apparaisse. Utiliser le point d'ourlet invisible pour tous les tissus non extensibles et le point élastique invisible pour les tissus élastiques. 1. Les deux fils utilisés doivent être de la même couleur que le tissu à coudre. 2. Plier le tissu à la taille souhaitée pour l'ourlet, (comme le montre la fig. A) puis replier le bord en faisant chevaucher de 6 mm (voir fig. B.) 3. Mettre le sélecteur de modèle de point sur point ourlet invisible ou point élastique invisible et régler la longueur et la largeur du point. 4. Coudre sur le repli (comme le montre la fig.C.). 5. Lorsque le tissu est déplié, on obtient un ourlet invisible, tel qu'indiqué dans la fig.D. 1 Endroit du tissu 2 Envers du tissu REMARQUE: Utiliser le point élastique invisible pour coudre des tissus élastiques. Modelo de puntada Largo de puntada Ancho de puntada (Puntada invisible) (Puntada invisible elástica) F-2 F-1,5 3-6,5 La puntada de dobladillo invisible sirve para terminar la orilla de una prenda, tal como el borde inferior de los pantalones, sin que se vea la costura. Utilice la puntada de dobladillo invisible para todos los tejidos que no sean elásticos y la puntada invisible elástica para los tejidos elásticos. 1. Ambos hilos deben ser del mismo color que el tejido. 2. Doble el tejido según la orilla que desee hacer tal como ilustra la fig. A. Luego, dele la vuelta tal como indica la fig. B. Deje unos 6 mm (15/64") sin coser para esconderlos. 3. Ponga el selector de puntada en puntada invisible o puntada invisible elástica y ajuste el largo y ancho de la puntada. 4. Cosa en el pliegue tal como muestra la fig. C. 5. Al desdoblar el tejido, tendrá un dobladillo con puntada invisible tal como lo muestra la fig. D. 1 Lado derecho de la te 2 Dorso de la tela NOTA: La puntada elástica invisible (Puntada invisible elástica) se recomienda para tejidos elásticos. A2 B 1C 1 D2 1 2 2 1 54 MAINTENANCE INDEX