Brother International PS-2250 User Manual - French - Page 80
Securing The Stitching And Cutting The Button, Model Ps-2470, Ps-2360
View all Brother International PS-2250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
TABLE OF CONTENTS (Model PS-2470, PS-2360, PS-2250) SECURING THE STITCHING AND CUTTING THE BUTTONHOLE 1. To secure the stitching, turn the material 90 degrees counterclockwise and sew Straight Stitches to the end of the front bar tack of the buttonhole. 2. Remove the material from the machine. It is recommended that pins be placed across both ends of the buttonhole as protection against cutting the stitches. 3. Cut an opening in the middle of the buttonhole with a seam ripper tool. Be careful not to cut through any stitches. CAUTION When using the seam ripper to open the buttonhole, do not put your hand or finger in the path of the ripper. The ripper may slip and cause injury. KNOWING YOUR SEWING MACHINE STRAIGHT AND ZIGZAG STITCHING BUILT-IN STITCHES BUTTONHOLE AND BUTTON SEWING USING ATTACHMENTS AND APPLICATIONS MAINTENANCE (Modèle PS-2470, PS-2360, PS-2250) COMMENT ARRETER LA COUTURE ET OUVRIR LA BOUTONNIERE 1. Pour arrêter la couture, tourner le tissu de 90˚ dans le sens inverse des aiguilles d'une montre et coudre des points droits jusqu'au bout de la partie avant de la bride d'arrêt de la boutonnière. 2. Retirer le tissu de la machine. Il est vivement conseillé de placer des épingles à chaque extrémité de la boutonnière afin de ne pas couper les barrettes. 3. Couper une ouverture au milieu de la boutonnière à l'aide du découdvite, en veillant bien à ne couper aucune couture. ATTENTION Lorsque vous utilisez le découd-vite pour ouvrir la boutonnière, ne mettez pas votre main ou vos doigts en face du découd-vite. Le découd-vite risque de glisser et de vous blesser. (Modelo PS-2470, PS-2360, PS-2250) PARA COMPLETAR LAS PUNTADAS Y CORTAR EL OJAL 1. Para asegurar las puntadas, gire el tejido a 90 grados en el sentido contrario al de las manecillas de un reloj y cosa unas Puntadas Rectas hasta el final de la línea del remate de la parte delantera. 2. Retire el tejido de la máquina. Se recomienda colocar alfileres en ambos extremos del ojal para evitar el corte de las puntadas. 3. Corte una apertura en el medio del ojal con el cortador especial que sirve para abrir costuras. Tenga cuidado en no cortar ninguna puntada. PRECAUCIÓN Cuando use el abreojales para abrir el ojal, no ponga la mano o el dedo en la dirección del corte. Se le podría escapar el abreojales y hacerse daño. 68 INDEX