Canon DC10 DC20/DC10 Instruction Manual - Page 123
Troubleshooting
UPC - 013803041583
View all Canon DC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Tr Trouble? oubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. E Power Source Problem Solution Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery 21 pack. Attach the battery pack correctly. 21 The camcorder switches off Battery pack is exhausted. Replace or charge the battery 21 by itself. pack. Power save function has been activated. Turn on the 84 camcorder. LCD/viewfinder switches on Battery pack is exhausted. Replace or charge the battery 21 and off. pack. Battery pack will not charge. Charge the battery pack in temperatures between 0 °C and - 40 °C (32 °F and 104 °F). Battery packs become hot with use and may not charge. Wait - until the battery pack temperature is below 40 °C (104 °F) and retry charging. The battery pack is damaged. Use a different battery pack. - Recording/Playback Trouble? Problem Solution Buttons will not work. Turn on the camcorder. - Load a disc. 31 Abnormal characters appear This camcorder uses a microcomputer. External noise or static - on the screen. The camcorder electricity may cause abnormal characters to appear on the does not operate properly. screen. In such case, disconnect the power source and reconnect it after a short time. If the problem still persists, disconnect the power source and press the RESET button with a pointed item. Pressing the RESET button resets all settings. " " flashes on the screen. Load a disc. 31 " " flashes on the screen. Battery pack is exhausted. Replace or charge the battery 21 pack. The wireless controller will not Set [WL.REMOTE] to [ON]. 83 work. The battery of the wireless controller is exhausted. Replace 25 the battery. Check that you did not lay the camcorder on its side so the - omni selector's button is pressed down. Place the camcorder upright. Video noise appears on screen. When using the camcorder in a room where a plasma TV is - located, keep a distance between the camcorder and the plasma TV. Video noise appears on the When using the camcorder in a room where a TV is located, - TV screen. keep a distance between the compact power adapter and the power or antenna cables of the TV. Even without a disc loaded, The camcorder is checking if a disc is loaded or not. This is not - when closing the disc a malfunction. compartment cover a motor sound can be heard. 123